The TVIP Box console meets all modern requirements a multimedia device, including the support of streaming media, video on demand (VOD), playback of digital channels in a high quality, as well as access to the OTT content (youtube, Picasa, online entertainment, weather forecast, social networking, and others) and even includes a Web browser. What is internet streaming?
TVIP is very similar to the MAG boxes and somehow emulates the MAG box embedded software. What is MAG?
How to add IPTV channels to TVIP Box (New version)
If you have new TVIP boxes like 605, 615 you can use this tutorial, but if your boxes is a older version like 410 you need to update the TVIP box operating system or Use tutorial for old versions.
Step 1: After run the TVIP box and set the primary setting like language and time, Start from the main menu and go down to see the “Setting” and click on “TV” as depicted in the below picture.
Step 2: Now change the Content source to “Web portal” and click on “Setup Web portal“.
Step 3: First change the API Mode to “MAG” then on the “Portal URL:” enter your portal server address (you can ask for this info from your IPTV distributor) and click on “Apply” and “Restart“.
Note: If you don’t have “MAG” API in your setting use “GSTB” API.
Now you must insert your device Mac address to your IPTV dashboard or simply give it to your IPTV distributor. What is Mac address?
The progressive IPTV providers give you a dashboard which you can add MAC to your line yourself on dashboard.
Note: You can find the TVIP box MAC address on the back of the box.
Step 4: After restarting the box in the main menu click on “Watch TV“, you must wait for the portal to load your playlist. This might take a few minutes.
Step 5: As you can see the channels will pop up automatically and you can select any desired channel and start the streaming.
How to add IPTV channels to TVIP Box using M3U url
In Step 2 of the above tutorial change the Content source to “M3U-playlist” and click on “Setup M3U-playlist“.
Enter M3U url which you receive from your IPTV provider here and click on “Apply” and “Restart“.
How to add IPTV channels to TVIP Box (Old version)
Step 1: Start from the main menu and select the “Setting” as depicted in the below picture.
Step 2: Now on the right menu select the “TV” icon and then on the right side change the Content source to “Web portal” and click on “Setup Web portal“
Step 3: Now on the “Portal URL:” enter your portal server address (you can ask for this info from your IPTV distributor) and click on “Apply“.
Now you must insert your device Mac address to your IPTV dashboard or simply give it to your IPTV distributor. What is Mac address?
The progressive IPTV providers give you a dashboard which you can add MAC to your line yourself on dashboard.
Note: You can find the TVIP box MAC address on the back of the box.
Step 4: After adding your portal server address, you must wait for the portal to load your playlist. This might take a few minutes.
Step 5: As you can see the channels will pop up automatically and you can select any desired channel and start the streaming.
Features of TVIP Box
- Under the operation of the middle product TVIP
- Under operation of IPTV middle Product portal
- Under the company that middle Product ‘Stalker’ purse
- Clients Custom Middle Product over c + + API
- Without a middle Product with easy dress M3U playlists
- Media Player with USB/LAN Media Supported playback
- Customers Custom Middle Product via HTML5/JS API
- Customers Custom Android APK
- Windows sharing support (Samba)
- External USB and SD card support
- Support for FileSystems: FAT16/32, NTFS (read), NFS, ext2, ext3
- Streaming Media protocol support RTSP, RTP, UDP, IGMP, HTTP
- Timeshift using a USB drive or SD card
- M3U playlist support
- TV Guide Support for EPG: Xmltv and JTV
- AIR MOUSE support
Powerful CPU
TVIP media centers always include modern SoC with powerful multi-core CPU, that allows your customers to enjoy all modern multimedia applications, that not only developed today, but that will be developed in the next couple of years.
USB support
All TVIP S-Box carry the USB-host connection.
You can connect flash drives, HDD, keyboards and wireless remote and play video or music directly from an external hard drive or flash card. This will be a great extension to your service.
TVIP S-BOX supports AVI, MKV, MP4 and many other media formats. It also supports multichannel audio and subtitles.
High-quality WiFi
There diverse options for nearly all media centers:
- WiFi 2,4 GHz
- WiFi 2,4/5 GHz
Learning remote control
Easy and reliable. Strong plastic and soft rubber buttons.
Setup is fast and simple. Remote supports learning function for TV control. Learning setup does not reset after the battery change.
Developed by iptvhelpcenter.com
I have hade problems with my both lines since getting them.
I have to restart at least 1 timme /day.
Can you see what the problem is, please?
Are you using TVIP box?
Please make sure you added a correct portal address.
Of course!
I can watch but It works badly, lot of disturbances. Restarts, sometimes many hours without channels. Loading very slow.
Do you have any clue why?
Can you help, please?
The TVIP boxes are old technology devices with low memory.
I can recommend you to decrease the number channels you want, i mean try to remove bouquets from countries you don’t want to watch and only keep important channels for you.
This will help box to load faster.
Olá boa tarde,
Tenho uma Box TVIP 410 e quando vou as configurações em web portal não aparece a definição MAG e não consigo meter a linha do fornecedor, será que tenho que carregar algum ficheiro?
Obrigado.
Hi
If you can not find MAG API in your setting, try to use GSTB API.
How do I unsecure MAG under dashboard? I think it is not working on my TV because MAG is secured.
Please contact your IPTV provider.
Hej!
Min nya box startar inte efter vi har gjort installationerna. Får ingen kontakt med den. Vad ska man göra?
Hi
Did you contact your IPTV provider?
Please make sure you added correct portal.
How do i add subtitles on swedish channels like cmore and viasat channels? I have tvip 605 4K
Please go to menu > setting > subtitle.
I have problems with TVIP S-Box v.530
Software version: 5.0.48
He doesn’t read my portal, nothing happens.
Can you help me, I don’t know what the problem is?
Thank you
Please contact your IPTV provider and check if you added correct portal address.
I have tried couple of providers and after changing portal information I always land on “Authentication” screen. Where it asks for login and password.
I followed all the steps shared on the site but authentication screen doesn’t go away.
Please ask your IPTV provider to change your portal address to not secure portal.
Secure portal does not work on TVIP boxes.
I’m using an android box with iptv smarters. Loading the m3 script (works fine) but when I try to load the script for the epg its asking for an xml script. Looking at the guide outputs in the dashboard I can’t see any xml scripts that give me my guide.
The script for the m3 works fine and I get all the channels without the epg, so I know thats correct.
Hi
Did you try Xtream codes setting or remote list setting?
Hi, why when i changed my portal address and try to log in, it loads up and a black screen appears.
Can you please help ?
Hi
What’s the model number of your box?
Hi
My tvip 605s box dont open my portal just a white cirkle… everything works fine in my sons apartment and hes box works fine at my place, but he use another portal.
In my network I use Deco 5 mech router, can it be problems with some portal in my router? We are use Google dns … and notning is blocked in my router. Can my ISP block my portal?
Hi
Please contact your IPTV provider, i think you added a wrong portal.
Tvip box turn off and then turn on are not playing last channel which one we left turn off. Any suggestions?
Is it TVIP 410?
Hi
Can I record & how on SD card?
S-box v.605
Do you have SD card slot on your box?
Yes, & I can see it on media player.
Something about recording on External USB or SD card?
S-box v.605
I can play from External USB or SD card but how to record?
Hello, i buy new 605 box from aliexpress, old same model box use uhdtv server, now comes only black screen with new box. Settings in new box are same than oldone had. What can do? Looks portal box mac address or why new don’t work. Internet works and linux update comes fine.
Please contact your IPTV provider about this problem, they will help you.